|
`Return your pool or spa water to a crystal clear sparkle`
After periods of high bather loading pool and spa water can become cloudy and unattractive. Pool and Spa Sparkle will restore the water clarity. Small particles including dead algae, carbonates, silica and skin cells are collected together by the Pool and Spa Sparkle. This process is called flocculation and causes the particles to increase in size and drop to the floor for easy vacuuming. The lighter particles are removed by the filters.
Treatment
Add 2.5 litres Pool Sparkle per 50m³ pool water. For regular water treatment add 50mls per 1 m³ water. In Hot Tubs and Spas add 100mls per 1000 litres.
Application
Add, the volume required of Pool Sparkle to 10 litres water in a plastic bucket or watering can. Add slowly to pool/spa water at the point where water from the filter re-enters the pool. Run the filters for 2 hours after addition. When spas are in constant use treat the water daily, spas may require a small amount of No Foam during treatment.
This product works extreamly well and is very effective on Spas and Hot Tubs, returning the water to crystal clear clarity.
CHiP Product Information Sheet
|
