Help & Advice

You can find in this section technical support guides and information to help you get the best out of your pool or spa. Read our Help & Advice here

Troubleshooting

Troubleshooting problems in swimming pools and spas. Read our Troubleshooting Guides here

Fast Delivery

Delivery is FREE for all orders over the value of £75.00 and £7.50 for orders under this value to mainland UK. Read more about our delivery policy here

Hassel Free Returns

In the unlikely event you need to return your parcel, read our returns policy here

Briswim Total Alkalinity Reducer and De-Scaler 5Ltr

This Item
£20.49
Product ID:
SKU00276
In stock
  • To Reduce Total Alkalinity Level.
  • De-Scaler to remove scale from pool surrounds. 
View All Product Details Here

Briswim Total Alkalinity Reducer and De-Scaler 5Ltr

T.A Reducer- To Reduce total Alkalinity of Pool Water.

Dose Rate:

5 litres of Bartletts TA Reducer will reduce the Total Alkalinity of 10,000 gallons of pool water by approx. 30ppm. 

Application:

Switch off the circulating pump, calculate the quantity of Bartletts TA Reducer required. Deposit this quantity into one place, preferably at the deep end taking care not to spray or splash the solution over the pool surround. After one hour switch on circulation pump and allow pool water to mix thoroughly. Test pH and adjust to range 7.2-7.8. Re-test for Total Alkalinity and redose with Bartletts TA Reducer if required. Reccomended Total Alkalinity level 80-120ppm. If more than one dose is required always place in a different area of the pool. Always away from ladders, steps, lights and equiptment. 

Note:

If more than 4 x 5 litres of Bartletts TA Reducer per 10,000 gallons is required, then dose in stages. 

DE-SCALE- To Remover scale from Pool Surrounds-

Application-:

To clean and de-scale areas of the swimming pool and surround, dilute Bartletts TA Reducer as required and apply to the stained and/or scaled area to be cleaned using a pool brush. Wash off with plenty of water when stain and scale are removed. 

Note:

Prolonged contact with Bartletts TA Reducer will cause corrosion and etching to surfaces and damage liners.

Warning- This container must not be used or contaminated with other materials. 

Storage & Handling

  • Store in a cool, dry place away from oxidizing and reducing agents, strong acid, alkalis, solvents and organic materials. 
  • Do not mix with other chemicals. 
  • Always wear suitable gloves and eye protection when handling.

Use biocides safely. Always read the label and product information before use.

To write your own review, please, log in or register