Help & Advice

You can find in this section technical support guides and information to help you get the best out of your pool or spa. Read our Help & Advice here


Troubleshooting problems in swimming pools and spas. Read our FAQs here

Fast Delivery

Delivery is FREE for all orders over the value of £75.00 and £7.50 for orders under this value to mainland UK. Read more about our delivery policy here

Pool Size Calculator

Knowing your pool's volume is vital when making adjustments as all calculations and dose rates are based on it.

View Pool Calculator

Fi-Clor pH & Alkalinity Reducer 7Kg

This Item
Product ID:
Out of stock
  • Improves water quality 
  • Fast acting 
  • Corrects high pH & alkalinity 
  • Ideal for all pools and compatible with all treatment products 
  • CLP Product Information Sheet
View All Product Details Here

Fi-Clor pH & Alkalinity Reducer 7Kg

Depending on the method of dosing, Fi-Clor pH & Alkalinity Reducer will lower either the pH or the total alkalinity in swimming pool water. High pH can result in cloudy water and contribute to scale formation and may reduce the effectiveness of chlorine based sanitisers. High alkalinity will make it difficult to lower the pH as any correcting chemicals will be taken up by the buffering action of the alkalinity.

Treatment - to Reduce pH 

  1. Calculate the volume of water in the pool.
  2. Take a pH reading using your test kit or test strips. You will need to lower the pH if the reading is above 7.6.
  3. Dose a maximum of 500g of Fi-Clor pH & Alkalinity Reducer in the pool water at any one time.
  4. With the filtration system running, distribute evenly around the pool, avoiding the skimmers.
  5. Continue filtration and re-test after 4 hours. If the pH is still high, repeat the dose.

Treatment - to Reduce Total Alkalinity

  1. Take a total alkalinity reading using a test kit or test strips. If the reading is above 150mg/l (ppm), dose 1kg of the product in increments, in a small area at the deep end of the pool. This should be carried out with the filtration running and avoiding the skimmers. Each application will reduce the alkalinity by approx. 10 - 20mg/l (ppm).
  2. Re-test after 24 hours. If the total alkalinity is still high, repeat the dose until total alkalinity falls below 150mg/l (ppm).

Storage & Handling

  • Store in a cool, dry place.
  • Contact with combustible materials may cause fire.
  • Do not mix with other chemicals.
  • Always wear suitable gloves and eye protection when handling.

Use biocides safely. Always read the label and product information before use.

To write your own review, please, log in or register