Use biocides safely. Always read the label and product information before use

Instructions

 ON START-UP:

1         For new spas being filled for the first time, shock dose with Fi-Clor Superfast Superchlorinator to kill any harmful organisms that might be present in water left in the circulation system from factory testing. Maintain the chlorine level at a minimum of 20mg/l (ppm) for 2 hours.

FOR ONGOING SANITISATION:

1         The product may be added directly to the water with the circulation running when the spa is not in use. The total bromine level should be maintained within the range 4-6mg/l (ppm). Test at regular intervals using test strips or a bromine test kit.

2         Maintain the pH within the range 7.2-7.6 and adjust if necessary using Spa pH correction chemicals. Test the pH at regular intervals.

3         To increase the total bromine level by 1mg/l (ppm), add 3g of Fi-Clor Spa Brominating Granules per 1,000 litres of spa water.Shock dose regularly with Spa Non-Chlorine Shock or Fi-Clor Spa Oxy-Brite® to remove organic pollutants. After shock dosing allow the total bromine level to fall to within the normal range before bathing recommences.

Storage & Handling

• Store in a cool, dry place.
• Contact with combustible materials may cause fire.
• Do not mix with other chemicals.
• Always wear suitable gloves and eye protection when handling.