We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fi-Clor Superfast Granules-1Kg
- Powerful shock & sanitiser
- Convenient alternative to liquid chlorine
- Stronger than any unstabilised granular chlorine alternative
- Fast dissolving and fast acting
- Stabiliser-free, no chlorine lock
- CLP Product Information Sheet
Fi-Clor Superfast Granules-1Kg
Fi-Clor Superfast Granules can be used either as a regular pool sanitiser, or as a shock to treat green or cloudy water. It contains 15% more available chlorine than standard calcium hypochlorite and its fine particle size enables you to dose directly into the pool rather than pre-dissolve (see instructions).
Treatment
- Calculate the volume of water in the pool.
- Thoroughly brush off any algae that may be clinging to the pool surfaces.
- Adjust the pH to 7.2.
- Add 700g per 50m3 (11,000 gals). Broadcast the product evenly over a wide area in the deepest part of the pool. It should only be used when bathing has ceased. For outdoor use, avoid facing the wind when dosing. For heavy algae contamination, double this dose rate may be required.
- Run the filter for 24 hours, then backwash it and vacuum the pool throughly. Any remaining haziness in the water should be removed using one of the Fi-Clor® range of water clarifiers.
- To help prevent a recurrence, ensure that free chlorine levels never fall below 1mg/l (ppm) for unstabilised or 2mg/l (ppm) for stabilised chlorine pools. Also dose the pool with a Long Life Algicides.

Storage & Handling
- Store in a cool, dry place.
- Contact with combustible materials may cause fire.
- Do not mix with other chemicals.
- Always wear suitable gloves and eye protection when handling.
Use biocides safely. Always read the label and product information before use.