Help & Advice

You can find in this section technical support guides and information to help you get the best out of your pool or spa. Read our Help & Advice here


Troubleshooting problems in swimming pools and spas. Read our Troubleshooting Guides here

Fast Delivery

Delivery is FREE for all orders over the value of £75.00 and £7.50 for orders under this value to mainland UK. Read more about our delivery policy here

Hassel Free Returns

In the unlikely event you need to return your parcel, read our returns policy here

OPC Small Summer Pool Kit - Non-Copper Algaecide and Chlorine Shock Granules

This Item
Product ID:
Out of stock

OPC Summerguard - Non-Copper Swimming Pool Algaecide 5L

OPC Chlorine Shock Granules 4kg

  • Unstabilised Chlorine
  • Ideal For Shock Dosing (Deep Clean)
  • Perfect for Swimming Pool, Spa and Hot Tub Water
  • Rapid Dissolving
  • Kills Bacteria and Viruses
  • Packed in 1Kg Re-sealable Pouches
  • CLP Product Information Sheet
View All Product Details Here

OPC Small Summer Pool Kit - Non-Copper Algaecide and Chlorine Shock Granules

A Small Summer Pool Kit that will help keep your pool healthy all summer with this premium selection of essential products.

OPC Summerguard - Non-Copper Swimming Pool Algaecide 5L

A Long Life Non-Copper Algaecide which will assist in the long term prevention of algae formation. Add this product during the opening process to offer maximum protection from Algae.

Treatment (Summerguard)

  1. The ideal pH reading is between 7.3 – 7.5
  2. Ensure bathing has ceased before adding chemicals to the water. 
  3. It is good practice to Shock Dose with chlorine prior to application of Summerguard Non-Copper Algaecide. 
  4. Wait 24hrs after Chlorine Shock before adding algaecide. 
  5. Dose Summerguard Non-Copper at a rate of 5lts for 56M3 (12,300 gallons). 
  6. Add Summerguard Non-Copper directly to circulating water to ensure thorough distribution. 
  7. During excessively wet winter periods a further addition of  Summerguard Non-Copper is recommended. 

OPC Chlorine Shock Granules 4Kg

Rapid Dissolving Unstabilised Chlorine Shock Granules are ideal for raising Free Chlorine readings without having an impact on stabiliser reads (cyanuric acid). Ideal for Shock Dosing the swimming pool water on a weekly basis after heavy bathing or as a preventative measure to ensure bacteria and organic contaminants are quickly eliminated.

Treatment (Chlorine Shock Granules)

  1. Test the water for Free Chlorine using a CHLORINE TEST KIT. 
  2. It is recommended swimming pool water is shock dosed after Heavy Bathing and/or during warm weather to ensure water clarity is maintained and sanitiser efficiency. 
  3. Ensure bathing has ceased before adding chemicals to the water. 
  4. Add OPC Chlorine Shock Granules directly to circulating water with water temperature above 200C (for temperatures below 200C add product to 10 litres of clean water in a clean plastic container and add to directly to the circulating pool water.) 
  5. To increase Free Chlorine reading by 1 PPM (parts per million) add 75g per 50 M3 (11,000 gallons) of swimming pool water. 
  6. A shock dose of Chlorine Shock should achieve a reading between 5 – 8 PPM 
  7. During the shock dose process always ensure water is circulating via the filter and all pool covers are removed. 
  8. After 24 hours re-check Free Chlorine Readings and pH levels. 
  9. Swimming should not resume until Free Chlorine levels are below 5 PPM (but above 2 PPM) and pH levels are 7.3 – 7.5.

Storage & Handling

  • Store in a cool, dry place. 
  • Contact with combustible materials may cause fire. 
  • Do not mix with other chemicals. 
  • Always wear suitable gloves and eye protection when handling. 

Use biocides safely. Always read the label and product information before use.

To write your own review, please, log in or register