OPC pH Plus 1 Kg

Be the first to review this product

Availability: In stock

  • Increases the pH Level
  • For Use In Swimming Pool, Spa and Hot Tub Water

CLP Product Information Sheet

View all Details

pH Plus 1Kg

  • pH Plus 1Kg

You may also be interested in the following product(s)


OPC pH Plus 1kg

Use to increase pH when the level falls below 7.2 in Swimming Pool, Spa and Hot Tub water. If the pH reading is too low it can cause eye and skin irritations and cause corrosion to the Swimming Pool, Spa and Hot Tub equipment.


  1. Ensure bathers are out of the water when adding chemicals.
  2. Use a test kit to determine the pH reading, the ideal reading is 7.4 - 7.6, if the reading is below 7.4 use pH Plus to increase the reading.
  3. To increase the pH, dose at the rate of 30g per 3000 litres of water.
  4. If the Swimming Pool Water is up to temperature (above 21oC) add the pH Plus directly to the water with circulation on. If the water is cold, then pre-dissolve pH Plus in a clean container filled with clean warm water and then distribute around the surface of the water.
  5. Re-test the water after 30 minutes, if the pH still needs to be increased follow steps 3 and 4 again.
  6. Only add Spa pH Plus in stages and always re-test after additions.

Storage & Handling

  • Store in a cool dry place
  • Keep out of reach of children
  • Do not get in eyes, on skin, or on clothing
  • Wear protective gloves/protective clothing/eye protection/face protection

Use biocides safely. Always read the label and product information before use.

Additional Information
Model ONPFG057/1
Manufacturer OPC
Pack Size No