- The new PoolLab® 1.0 is a single wavelength photometer for professional water analysis of private pools and spas.
The new PoolLab® 1.0 is a single wavelength photometer for professional water analysis of private pools and spas.
An in-built but changeable cuvette allows quick water sampling by just dipping in the IP67 waterproof PoolLab®.
PoolLab® with its 6 buttons is designed for instant access to the parameters installed, which are: pH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer). Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone and Hydrogen Peroxide.
As PoolLab® uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management.
Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.
A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.
PoolLab® 1.0 offers the following pre-installed parameters:
|pH||Range 6.5 – 8.4 pH|
|Chlorine(free/combined/total)||Range 0.00 – 6.0 mg/l (ppm)|
|Alkalinity (Acid Capacity)||Range 0 – 300 mg/l (ppm) CaCO3|
|Cyanuric Acid (Stabilizer)||Range 0 – 160 mg/l (ppm)|
|Active Oxygen (MPS)||Range 0.0 – 30.0 mg/l (ppm)*|
|Bromine||Range 0.0 – 13.5 mg/l (ppm)**|
|Chlorine Dioxide||Range 0.0 – 11.4 mg/l (ppm)**|
|Ozone||Range 0.00 – 4.00 mg/l (ppm)**|
|Hydrogen Peroxide||Range 0.0 – 2.9 mg/l (ppm)*|
Storage & Handling
- Store in a cool, dry place away from oxidizing and reducing agents, strong acid, alkalis, solvents and organic materials.
- Do not mix with other chemicals.
- Always wear suitable gloves and eye protection when handling.
Use biocides safely. Always read the label and product information before use.