6 x Chlorogene T25 (6 Pots of 5 Chlorine Dioxide Tablets)

Chlorogene T25 is a Chlorine Dioxide donor, its ideal when added to Hot Tub water for removing Biofilms and dealing with bacteria (particularly when water has failed TVC’s and bacteria results).

Add Chlorogene T25 tablet(s) on commission of Hot Tub water and/or decommissioning of water (drain down) to provide a safe environment for bathers, the product goes to work straight away with a very quick contact time on bacteria. Ensure you use Chlorogene T25 as part of your weekly/ongoing water management regime.

Always use a primary sanitiser such as chlorine or bromine in an in-line feeder, but remove when applying Chlorogene T25 to the water. 

DO NOT USE HOT TUB WHILST TREATMENT IS IN PROGRESS

Shock dose:

• Remove all chemical feeders from the Hot Tub prior to application of Chlorogene T25.
• Ensure the water is circulating before adding Chlorogene T25 to the water.
• Remove covers before application.
• Remove cartridge filter(s) prior to application of Chlorogene T25.
• Turn on the circulation (pumps) and open all diverter valves.
• Please refer to the product label safety information for applicable PPE.
• To a 1,000 Litre Hot Tub remove tablet from the foil pouch and add 2 tablets directly to the skimmer weir/filter housing. The tablets will dissolve in approximately 1-2 minutes (water temp 36 degrees).
• In some cases, after a few minutes the water may turn cloudy if this happens add 1 additional tablet, leave for 30 minutes before draining and refilling the Hot Tub.

Maintenance dose:

• As an ongoing maintenance regime, add 1 tablet prior to each drain down of Hot Tub water.
• Use Chlorogene T25 to re-commission the water prior to use with cartridge filters in-situ.
  
  

Use biocides safely. Always read the label and product information before use.