We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fi-Clor Spa Alkalinity Increaser 1.2 Kg
Fi-Clor Spa Alkalinity Increaser 1.2 Kg
Fi-Clor Spa Alkalinity Increaser corrects alkalinity when it falls below 80mg/l (ppm).
Alkalinity is a measure of the total amount of alkali in spa water. If the alkalinity is too low, most chemicals added to the spa will directly affect the water balance leading to rapid fluctuations in pH readings. Alkalinity at the correct level will help protect, or 'buffer' the pH.
Treatment
- Take an alkalinity reading using your test kit or test strips. You will need to raise the total alkalinity if the reading is below 80mg/l (ppm).
- The dose rate is 30g Fi-Clor Spa Alkalinity Increaser per 1,000 litres (220 galls) of spa water. Each dose will raise the alkalinity by approx 10 - 20mg/l (ppm).
- With the circulation running, dose directly in several areas around the spa, avoiding the skimmer. Only dose when bathing has ceased.
- Re-test after 24 hours. If the total alkalinity is still low, repeat the dose.
- Maintain alkalinity between 80 - 160mg/l (ppm).
Storage & Handling
- Store in a cool, dry place.
- Contact with combustible materials may cause fire.
- Do not mix with other chemicals.
- Always wear suitable gloves and eye protection when handling
Use biocides safely. Always read the label and product information before use.