Spa and Hot Tub Range - Spa Instant Filter Cleaner 500ml

Spa Instant Filter Cleaner can be used on a regular basis (ideally weekly) and offers a quick solution to cleaning filter cartridges. The unique "trace dye" shows where you have sprayed the product so that you can ensure complete coverage of the filter.

Treatment

1. Ensure bathers are out of the water when adding chemicals
2. Remove filter(s) from the spa or hot tub compartment.
3. Immediately place the filter(s) into a suitable clean bucket and allow the water to drain, then dispose of this water.
4. Spray the Spa Instant Filter all over the filter "veins" allowing good penetration of product, ensure product is applied in a well ventilated area and avoid applying during windy days.
5. The trace dye will show where the Spa Instant Filter has been appllied, do not over apply the product.
6. Leave to soak in a clean bucket  for 30 - 40 minutes and away from direct sunlight.
7. Rinse the cartridge with a hose ensuring all product is removed, foaming will occur during this process. 
8. When clean, return the cartridge(s) to the spa and hot tub compartment.

Storage & Handling

• Store in a cool dry place
• Keep out of the reach of children
• Do not get in eyes/on skin or on clothing
• Wear protective gloves/protective clothing/eye protection/face protection.

Use biocides safely. Always read the label and product information before use.